Or how to delay mowing the lawn, even on a nice day.
I used to have respect for fashion designers, especially of handbags and luggage, but I’ve lost some of that respect recently.
I finally bought a really nice bag, not the biggest designer, but one I had been looking at for several years. It’s a lovely, faux alligator in a deep brown, just the right size for weekend trips or as a carry-on bag for the plane or train. It’s really lovely – except it’s poorly designed. Apparently they don’t bother to actually use the products they design – or they have underlings struggling to carry their bags for them.
You see the pad for the shoulder strap is made from the same, shiny, hard, slick leather as the rest of the bag – which means it slides right off your shoulder. Ironically, the bag is lined with exactly the material that would have kept the bag on my shoulder had anyone bothered to sew it on – a flocked, velvety material.
What to do? Well my first thought was pull out a leather needle and sew on a patch of faux suede that I have. I tried to take the pad off the shoulder strap, but apparently it’s not made to come off – another point of poor design. So then I thought I just could sew along the edge, working around the strap.
But then I thought again: wouldn’t it be easier to sew a wrap to put on there? Handle wraps for luggage have become very popular, more so as identification than as a comfort measure. I had two choices readily available in my stash: a nice fabric with a bit of no-slip sewn on, or a piece of faux suede. While the faux suede would have been OK on its own, in the end I decided to use both.
I cut the suede to the length of the existing strap pad, then cut it wide enough to wrap around comfortably. Then I cut strips of the no slip, and of Velcro to close the wrap. I sewed the no-slip in place, sec –
Wait a minute, shouldn’t we be embroidering this? Of course we should – is that even a question? I searched on my machine for a fun little design, duplicated it three times, then added my initials to the bottom of the wrap. Don’t forget to use a topper with suede, so the stitched stand out better. I used a wash away topper as faux suede is washable, but if you use real suede or leather use a heat away topper instead.
OK, back to the story… I sewed the no-slip in place, secured at the ends with a bit of double-sided adhesive stay tape so it wouldn’t move. Then I flipped it over and sewed the Velcro on opposite sides of the wrap (you can use the double-sided stay tape here as well if you’re having trouble holding it in place.) You’ll notice in the photo I had to add a piece of stitch-n-ditch (or you could use a spare piece of pattern paper) on top of the no-slip because, well, it stuck to the machine like it’s supposed to, didn’t it? You could sew on the Velcro first, or not use the no-slip – either way. In any case, you will want to use a walking or roller foot with the Velcro to help it feed through your machine.
Seventy-five minutes later, I have a fun, pretty, personalized solution to a dumb-as-mud designer handbag problem. (And yes, the lawn got mowed after that.) What kind of fixes have you made on the fly?